How thick should resin coasters be?

Standard resin coasters are 0.5-1 cm thick. Thinner coasters (0.5 cm) are lightweight and economical. Thicker coasters (1 cm or more) feel more substantial and allow for deeper embedded designs, but use significantly more resin and take longer to cure.

How much pigment should I add to resin?

For mica powder, use 2-5% by weight of the total resin. Less gives a translucent shimmer, more gives an opaque effect. Alcohol inks need only a few drops per 30 ml. Liquid pigments are typically used at 1-3%. Too much pigment can interfere with curing.

What size are standard coasters?

Standard round coasters are 9-10 cm (3.5-4 inches) in diameter. Square coasters are typically 9x9 cm or 10x10 cm. Larger coasters (12 cm) suit oversized mugs and wine glasses. Silicone moulds are sold in all these sizes in the UK.

Can I make coasters in batches?

Yes. Mix enough resin for all coasters in one go to ensure colour consistency. Work quickly within the pot life (30-45 minutes for most epoxy). Pour each mould promptly after mixing. For large batches, mix in stages to avoid the resin overheating from exothermic reaction.

CraftCalcs

Resin Coaster Calculator — Volume & Pigment Amounts

Calculate resin volume for round or square coasters with pigment amounts.

Coaster ShapeShape of each coaster mould

Diameter

Internal diameter of coaster mould

Depth

Depth of each coaster mould

Number of Coasters

How many coasters to make in this batch

Pigment TypeType of colouring to add

Pigment Amount

Percentage of total resin weight

How We Calculate This

Volume Calculation

Round: pi x (diameter/2) squared x depth

Square: side x side x depth

Total = Single volume x Count x (1 + Wastage %)

Part A and B are split by weight according to your mixing ratio. Pigment is calculated as a percentage of total resin weight.

Frequently Asked Questions

Related Calculators

Resin Volume Calculator

Calculate the total resin volume needed for moulds of various shapes.

Hardener Ratio Calculator

Work out exact resin-to-hardener ratios by weight or volume for perfect curing.

Pigment Amount Calculator

Calculate the right amount of pigment, dye or mica powder for resin.

Mould Fill Calculator

Estimate resin needed to fill silicone moulds accounting for embedded objects.

Curing Time Calculator

Estimate resin curing time based on type, volume and ambient temperature.

Last updated: March 2026

All calculations are estimates. Always verify quantities before purchasing materials.